Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the battery located in the Smart ForTwo?

Model: Smart Smart 451 - Years 2007-2015
Part: Battery

In this video we can see where the battery is located in the Smart ForTwo and how to proceed in case we need to replace it. As shown, the battery is not located in the classic front compartment but inside the cabin, in front of the passenger seat. Before replacing it, make sure the key is not inserted, then go inside the cabin and lift the passenger mat. Then remove the protective panel, disconnect both terminals starting from the negative one and unscrew the fixing bracket nut. To install the replacement, simply follow the reverse procedure.

Posted on 3 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the battery located in the Smart ForTwo?
Where is the battery located in the Smart ForTwo?
Smart (2007-2015 / 451) In this video we can see where the battery is located in the Smart ForTwo, useful in case we need to replace it or perform an emergency start. As sho…
Where is the battery located in the Smart Fortwo?
Where is the battery located in the Smart Fortwo?
Smart (2007-2015 / 451) The battery of the Smart Fortwo is located inside the cabin: to access the device, you will need to open the passenger door and lift the carpet under…
How to Replace the Battery in the Smart Fortwo
How to Replace the Battery in the Smart Fortwo
Smart (2014-2022 / 453) Below are the step-by-step instructions to remove and replace the battery in the Smart Fortwo. First, open the front bonnet of your car and start by …

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2014-2022 - Where is the battery on the Smart 453? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos