Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door panel of the Smart Fortwo

Model: Smart Smart 450 - Years 1998-2007
Part: Door trim panel

Following these brief and simple instructions, we will see how to disassemble the inner lining of the front door of the Smart Fortwo. First, open the front door of the car and start removing the plastic cover of the handle; then unscrew the fixing screws located underneath, thus removing the inner handle, as shown in the video. Now unscrew the screws of the lining to remove it, subsequently disassembling if necessary also the plastic panel; in this way it will be possible to access the internal components of the door!

Posted on 9 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the front door panel of the Smart Fortwo
Guide to disassembling the front door panel of the Smart Fortwo
Smart (2007-2015 / 451) In this guide, we will see the main instructions on how to disassemble and replace the front door panel of the Smart Fortwo. First, open the front do…
How to Remove the Door Panel of a Smart ForTwo Cabrio
How to Remove the Door Panel of a Smart ForTwo Cabrio
Smart (2007-2015 / 451) Before starting, open the door of your Smart ForTwo Cabrio. Begin by removing the side mirror, detaching the inner cover and unscrewing the fixing bo…
Removing the Door Panel on a Smart Fortwo
Removing the Door Panel on a Smart Fortwo
Smart (2007-2015 / 451) How do you remove the (outer) door panel on a Smart Fortwo? Before starting the removal work, disconnect the battery terminals located in the front e…

    Frequently Asked Questions

    • Smart 2014-2022 - How to remove the door panel in the Smart Fortwo? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos