|
Do it yourself
| |||
| ||||
How to Remove the Sunroof on Smart Fortwo
Model: Smart Smart
451
- Years 2007-2015
To remove the sunroof on the Smart Fortwo cabrio, first, open the rear hatch of the vehicle. Now, unscrew the two bolts that secure the hood at the sides of the car, located inside near the rear lights, and begin to fold it upwards. Disengage the fabric part of the hood from the rigid bar at the lower rear and proceed to disengage it along the side perimeters. You can now lower the rigid bar and continue to disengage the hood from the sides. When you reach the horizontal roof section, it is necessary to remove the plastic piece that includes the high-level brake light. To do this, unscrew the 4 bolts that secure it in place using the appropriate spanner. Remove it while being careful to disconnect the electrical supply. At this point, unscrew the 2 outer bolts that secure the hood at the top cross member, operate the electric control to slide the hood back, and, by moving the necessary pieces for the hood to slide in the tracks (as shown in the images), slide the hood forward again to unscrew the 6 screws (3 on each side) found under the track cover. At this point, the job is done; disengage the rear part of the hood from the horizontal cross member and you can remove it from the car.
Updated on 5 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Smart
(2007-2015 /
451)
In this guide, we will see the main instructions that will allow us to disassemble and replace the roof of the Smart Fortwo. First of all, we open th…
Smart
(2007-2015 /
451)
The attached video tutorial shows us how to change the panoramic roof of the Smart Fortwo 451, as we can see, it is an operation to be carried out in…
Smart
(2007-2015 /
451)
Let's see in this guide the main instructions that will allow us to disassemble and replace the soft top slider, thus carrying out the repair, of the…
Other guides you may be interested in |
How to Replace the Brake Pads on a BMW X3
For this operation, you will need to remove the wheel where you will perform the replacement, so it will be convenient to lift your vehicle and place it on jack stands; this way, you will work much more comfortably. To remove the spring that holds the front pads, use a flathead screwdriver. Now, unscrew the bolts that secure the piston to the pads, then remove it, giving you access to both pads that brake the rotor. Of course, repeat the same steps on the other side if the same replacements are needed. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |