Do it yourself
Frequently asked questions about cars and motorcycles

How do you clean the throttle valve of the Smart Fortwo 450?

Model: Smart Smart 450 - Years 1998-2007
Part: Throttle body

Let's see how to clean the throttle body of a Smart 450: we will need a specific cleaner, such as Wurt 5000 or similar. Disconnect the air tube and remove the valve, which is fixed to the intake manifold with 4 screws, then unplug the electrical connector that controls the throttle. Apply the cleaner on the throttle blades, focusing on carbon deposits; wait a few minutes to allow the product to act, then use a soft brush to remove the residue: absolutely do not use metallic tools that could scratch the surfaces. If there are no problems, avoid opening the electronic part: only if the throttle does not move, remove the 4 metal clips that hold the electronic body together with the mechanical one; clean the tracks and brushes with an electronic contact cleaner and a cotton swab; do not touch anything with your fingers! Avoid any contact with the electronic tracks. Reassemble everything following the reverse path, and start the engine. At the beginning, the ECU will self-learn the new position of the throttle, which for a few seconds may rotate irregularly. When doing this job, remember to clean thoroughly, have clean hands, use a lot of delicacy and only specific products.

Posted on 2 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Smart (1998-2007 / 450) In this guide we will see the main instructions that will allow us to disassemble and clean (or replace) the EGR valve of the Smart Fortwo. First of …
Smart (1998-2007 / 450) Loosen the two clips on the intake hose, then slide it off and clean the inside with a cloth. To remove the throttle body, unscrew the four bolts sec…
Smart (1998-2007 / 450) In this guide, follow the main instructions to remove and replace the thermostat or thermostat valve of the Smart Fortwo 450. First, open the boot to…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos