Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Handbrake Cable on the Smart Fortwo

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Parking brake

See other generations:
Video tutorial

In this brief guide, you will find the main instructions on how to remove and replace the handbrake cable on the Smart Fortwo. First, lift the vehicle and start by removing the rear wheel; then remove the drum to access the brake shoes and the handbrake cable, disconnecting the spring and the cable from the adjuster, as shown in the video.

At this point, disconnect the handbrake cable from the lever inside the cabin by removing the cover of the centre tunnel; reassemble and correctly adjust the handbrake cable, performing several tests until you achieve the optimal result.


Posted on 26 March 2026 by ScegliAuto


Related tutorials

How to adjust the handbrake on the Smart Fortwo?
How to adjust the handbrake on the Smart Fortwo?
Smart (2007-2015 / 451) To adjust the handbrake on the Smart Fortwo, loosen the screws securing the left rear wheel so that it can be removed: after the wheel has been remov…
How to Replace Brakes on Smart Fortwo
How to Replace Brakes on Smart Fortwo
Smart (2007-2015 / 451) Worn brake pads? Here’s how to remove them on a Smart Fortwo. Lift the car on a column jack to the desired height: remove the wheel with the respecti…
Removing Rear Brake Pads on Smart Fortwo
Removing Rear Brake Pads on Smart Fortwo
Smart (2007-2015 / 451) Replacing damaged brake pads on a Smart Fortwo? Here’s how to remove them. Lift the car on a column lift to the desired height, then remove the wheel…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos