Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light in a Smart ForTwo?

Model: Smart Smart 453 - Years 2014-2022
Part:

In this tutorial, we will see how to reset the tyre warning light in a Smart ForTwo, a very simple and quick operation, to be performed only after restoring the correct pressure in each tyre following the instructions in the manual. First, go inside the cabin, then insert the key and turn on the ignition. Next, scroll through the various display tabs using the directional arrows on the steering wheel, enter "Change settings", then "Tyre pressure monitor", and confirm your choice. To complete the procedure, simply restart the vehicle.

Posted on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire warning light in the Smart ForTwo?
How to reset the tire warning light in the Smart ForTwo?
Smart (2014-2022 / 453) In this tutorial, we will see how to reset the tire warning light in the Smart ForTwo, an extremely simple and quick operation that should be done on…
How to Reset the Tyre Light on a Smart ForTwo?
How to Reset the Tyre Light on a Smart ForTwo?
Smart (2014-2022 / 453) In this tutorial, we will see how to reset the tyre light on a Smart ForTwo, a very simple and quick operation to perform only after restoring the co…
How to reset the tire pressure sensor of a Smart ForTwo?
How to reset the tire pressure sensor of a Smart ForTwo?
Smart (1998-2007 / 450) To reset the tire pressure light on a Smart ForTwo, start by turning on the instrument panel without starting the engine. Look for the reset button l…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos