Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Windscreen of a Smart Fortwo

Model: Smart Smart 450 - Years 1998-2007
Part: Windshield

Follow these steps to remove the windscreen of a Smart Fortwo. First, open the bonnet and fit the windscreen removal kit (under the windscreen), then close the bonnet and remove the seal around the windscreen (if removable). Once the seal is removed, cut the adhesive with the removal kit (screwdriver and string kit) and lift the glass using suction cups. Clean the perimeter of the front panel (remove any adhesive residue). Place the new windscreen on a secure base and apply suitable silicone for bonding.

Updated on 9 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Guide to replacing the windshield of the Smart Fortwo
Guide to replacing the windshield of the Smart Fortwo
Smart (2007-2015 / 451) In this guide we will see the instructions that will allow us to disassemble and replace the windshield of the Smart Fortwo. First of all, let's move…
Windshield Replacement on the Smart Fortwo 451
Windshield Replacement on the Smart Fortwo 451
Smart (2007-2015 / 451) In this video tutorial, learn how to remove and replace the windshield on the Smart Fortwo 451 by following the instructions below. First, remove the…
How to Remove the Gear Knob from a Smart ForTwo
How to Remove the Gear Knob from a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before you begin, sit in the driver's seat of your Smart ForTwo. To carry out this removal safely, it is strongly recommended to switch off the engin…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos