Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : Windshield replacement on the Smart Fortwo 451

Smart - Video tutorial

Model: Smart Smart 451 - Years 2007-2015
Part: Windshield
Operation: Windshield replacement on the Smart Fortwo 451

In this video tutorial we will see how to remove and replace the windshield on the Smart Fortwo 451, following the instructions below. First we remove the front hood, opening the levers; then we use a T20 torx screwdriver to unscrew the grille fixing screws that we find under the wiper arms; complete by unscrewing the side screws with a T30 torx wrench. At this point we can pry the sides of the windshield with something thin, in order to detach it; let's remove it and replace it with the new one, applying the reverse procedure!


Posted on 22 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Smart 2007-2015 - How much does it cost to replace the Smart windshield? Read Answer
    • Smart 2007-2015 - How much does the windshield of the Smart Fortwo cost? Read Answer
    • Smart 2007-2015 - Read Answer
    • Smart 2007-2015 - How much does it cost to replace the windshield of the Smart? Read Answer
    • Smart 2007-2015 - How much does the Smart windshield cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos