Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on a Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Starter motor

In this brief and simple guide, you will find the instructions that will allow you to remove and replace the starter motor on a Smart Fortwo. First, lift the vehicle and locate the starter motor, situated low at the rear (under the engine); then undo the securing screws and disconnect the power wiring to remove it, as shown in the video. At this point, perform the repair or replacement of the starter motor, securing it properly; then check the correct starting of the engine!

Posted on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor in the Smart Fortwo 700
Replacing the Starter Motor in the Smart Fortwo 700
Smart (1998-2007 / 450) Today, see the guide that will allow you to remove and replace the starter motor in the Smart Fortwo. First, open the rear hatch and begin by removin…
Guide to Replacing the Starter Motor on the Smart Fortwo 0.8 CDI
Guide to Replacing the Starter Motor on the Smart Fortwo 0.8 CDI
Smart (1998-2007 / 450) In this video tutorial, we will go through the main steps useful for removing and replacing the starter motor on the Smart Fortwo 0.8 CDI. First, ope…
How to Remove the Starter Motor on a Smart Fortwo
How to Remove the Starter Motor on a Smart Fortwo
Smart (1998-2007 / 450) Learn how to remove the starter motor on a Smart Fortwo. Open the boot of the car and secure it. First, use a socket wrench to disconnect the battery…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2014-2022 - How much does it cost to replace the starter motor on the Smart ForTwo? Read answer
    • Smart 2014-2022 - Where is the starter motor located on my Smart 453? Read answer
    • Smart 1998-2007 - Where is the starter motor of a Smart ForTwo located? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos