Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light Bulb on a Smart Fortwo

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Tail light bulb

See other generations:
Video tutorial

Want to replace the rear light bulbs on a Smart Fortwo? Follow this guide to remove the light and replace the bulbs. Open the boot lid, then unscrew the securing screws located at the side of the light (right side) using a screwdriver.

Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the damaged bulbs with new ones of the same size and voltage. Finally, reattach the light with the screws and reconnect the power connectors.

Test the functionality of the bulbs.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Remove the Headlight Bulb on a Smart ForTwo?
How to Remove the Headlight Bulb on a Smart ForTwo?
Smart (2004-2006 / Fourfour1, 454) Start by removing the upper front cover of your Smart ForTwo using the ignition key, then remove the underlying plastic. Next, unclip and remove the …
Replacing Headlamp Bulb on Smart Fortwo
Replacing Headlamp Bulb on Smart Fortwo
Smart (2007-2015 / 451) In this video, change the bulb of the compact Smart Fortwo. The process is very simple and takes only a few minutes: first, remove the engine cover o…
How to Remove the Rear Headlamp Bulb of a Smart Fortwo
How to Remove the Rear Headlamp Bulb of a Smart Fortwo
Smart (2014-2022 / 453) How to remove the rear headlamp bulb of a Smart Fortwo? Let's look at replacing the damaged part. Remove the plastic panel covering the rear headlamp…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos