Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Headlight replacement on Smart Fortwo

Model: Smart Smart 450 - Years 1998-2007
Part: Tail light

Let's see the replacement of the rear light of the Smart Fortwo if damaged. Lift the luggage compartment door, unscrew the tightening screws on the side of the headlight with a screwdriver. We detach the rear light from its housing once all the fastening screws have been removed (we disconnect the power supply terminals). We replace the bulbs if damaged with new ones (size and voltage equal). We fix the new lighthouse with attached screws after connecting the power supply terminals. We turn on the headlight lights to check operation (we operate the control levers to turn on the headlights).

Posted on 4 November 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the headlight bulb of a Smart ForTwo?
How to remove the headlight bulb of a Smart ForTwo?
Smart (2004-2006 / Fourfour1, 454) Let's start by removing the front top cover of our Smart ForTwo, using the ignition key, and then removing the plastic underneath. After that, we wil…
Smart Fortwo headlight bulb replacement
Smart Fortwo headlight bulb replacement
Smart (2007-2015 / 451) Let's see in this video how to change the light bulb of the small Smart Fortwo subcompact. The procedure is very simple and takes only a few minutes:…
Disassembly of the Smart Fortwo headlight
Disassembly of the Smart Fortwo headlight
Smart (2007-2015 / 451) In the video tutorial we will see how to remove the headlight of a Smart Fortwo 450; this operation will also allow us to access the bulbs to replace…

How to Remove the Front Headlight of a Mercedes S-Class

Want to remove the front headlight of a Mercedes S-Class? Let’s see how to proceed with the disassembly in the instructional video. Open the hood by pulling the hood release lever and secure it. Remove the retaining pins on the headlight bar using a socket wrench or battery-powered screwdriver. At this point, you will find additional pins on the lower side of the headlight; unscrew them from the metal brackets. Disconnect the bulb holders from the headlight and remove the headlight from the vehicle body. Install the new headlight with new bulbs if damaged (always use the correct type and size) and insert the headlight into its housing. Finally, tighten the pins on the headlight and test the proper functioning of the lights.

Watch the video!


by ScegliAuto

More videos