Do it yourself
| ||||
|
Smart - Video tutorial
Model: Smart Smart
Fourfour1, 454
- Years 2004-2006 Before we can begin, it will be necessary to go and sit in the driver's seat of our Smart. With a small slotted screwdriver to pry, we will have to remove the cover of the plastic handle placed around the button of the windows. When we have removed the side cover, using the screwdriver as before, we will have to pry into the slot between the button and its housing, disengaging the button itself. Once this is done, we will have to go and disconnect the internal plug, and we will have completed the disassembly. To fit the new button and close the internal door handle, we will have to follow these instructions, but on the contrary, and we will have finished the replacement.
Posted on 2 January 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |