Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to remove the seat of the Smart

Smart - Video tutorial

Model: Smart Smart 454, Fourfour1 - Years 2004-2006
Part: Seat
Operation: How to remove the seat of the Smart

Before we can start, we will have to go and open the door of our Smart. Using a socket wrench, let's start by unscrewing and removing the screws that secure the seat to the car. After that, we will have to go and unscrew the bolt that secures the belt to the seat. Once we have released the seat belt, we will have cleared the seat. We then proceed by going to raise the seat just enough to be able to disconnect the lower plugs of the seat. When we have completed this step, we will be able to permanently remove the seat, and we will have successfully completed the disassembly.


Posted on 9 January 2024 by ScegliAuto



How do you replace the seat belt latch on the Smart car?
Smart (2007-2015 / 451) In order to replace the buckle on the Smart's seat belt, you need to disconnect the connector that connects the buckle to the bottom of the seat; onc
How to adjust the seat of a Smart Fortwo seat
Smart (2014-2022 / 453) Let's see how to adjust the seat of the Smart Fortwo. We open the car door and enter the passenger compartment, then, we move the seat forward if we
How to remove the front seat of a Smart Fortwo
Smart (1998-2007 / 450) Let's see how to remove the front seat of a Smart Fortwo: move the seat back (with the electric buttons if present) and bring the seat up, then unscr

    Frequently Asked Questions

    • Smart 2014-2022 - How to unlock the seat of the locked Smart? Read Answer
    • Smart 1998-2007 - How much does it cost to redo the upholstery of a Smart? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos