Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I replace the clutch actuator on the Smart 451?

Model: Smart Smart 451 - Years 2007-2015
Part: Clutch

In order to replace the clutch actuator, it must be identified: this is located in the lower part of the car. To remove it, you have to disconnect the connector and with a pneumatic gun loosen the nuts that secure it to the vehicle body. Once the nuts have been loosened, the actuator can be removed and replaced with a new spare part. The new actuator will have to be inserted inside its housing and fixed again to the bodywork through the relative bolts. Once the piece has been fixed, it will be possible to re-connect the connector.

Posted on 4 September 2021 by ScegliAuto

Video tutorial

Related tutorials

How to install the clutch actuator on the Smart Fortwo 451
How to install the clutch actuator on the Smart Fortwo 451
Smart (2007-2015 / 451) In today's video tutorial we will see how to install the clutch actuator on the Smart Fortwo 451, following the instructions below. First of all we l…
Replacement of the clutch actuator of the Smart 451
Replacement of the clutch actuator of the Smart 451
Smart (2007-2015 / 451) In this video, we can see how to replace the clutch actuator of the Smart 451. The youtuber purchased a Sachs actuator, which can be found on the web…
Clutch actuator on the Smart 451
Clutch actuator on the Smart 451
Smart (2007-2015 / 451) In this video tutorial you can learn more about the operation of the clutch actuator of the Smart 451. Let's start by saying that the Smart is equipp…

Other guides you may be interested in

How to Remove the Dome Light in a Mercedes C-Class

In this video, see how to replace the bulb or LED in the dome light of a Mercedes C-Class. Using a screwdriver or plastic trim tool, pry between the dome light cover and its perimeter (without breaking the plastic), remove the grille from the dome light, and then take out the clear plastic cover. Replace the damaged bulb with a new one (same size and voltage). Reinstall the plastic cover in its housing (press it in with your hands until the tabs are fully secured). Test the light's proper functioning before reinstalling the piece.

Watch the video!


by ScegliAuto

More videos