Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Unlock the Stuck Gear of the Smart Fortwo 453?

Model: Smart Smart 453 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Transmission

See other generations:
Video tutorial

If the automatic gearbox of the Smart Fortwo series 453 is stuck, for example due to a completely discharged battery, and you need to put the gearbox into neutral, you can proceed by following the steps shown in the attached video. First, remove the plastic cover of the gear console, then lift the entire plastic of the centre tunnel just enough to free a small yellow switch located on the floor.

With the key inserted, push this switch upwards for a few seconds; this will engage the neutral gear.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Unlock the Automatic Gearbox in a Smart ForTwo?
How to Unlock the Automatic Gearbox in a Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial, see how to unlock the automatic gearbox in a Smart ForTwo, a very simple and quick operation to perform, for example, to move the v…
How to Replace the Clutch on a Smart 453?
How to Replace the Clutch on a Smart 453?
Smart (2014-2022 / 453) To replace the clutch on a Smart 453, lift the vehicle using a ramp to access the underside. Here, drain the oil from the gearbox by unscrewing the d…
How to adjust the automatic transmission of the Smart Fortwo
How to adjust the automatic transmission of the Smart Fortwo
Smart (1998-2007 / 450) Below we will see the instructions that will allow us to carry out the adaptation of the automatic transmission of the Smart Fortwo. In order to carr…

How to Set the Time on an Audi A6

Briefly, we will see the instructions to set the time on the Audi A6 by following these simple steps. First, get inside the vehicle and turn on the instrument cluster; then press the settings button and navigate to the time option to confirm your choice, as shown in the video. At this point, set the correct time and format, then exit the settings menu to save the changes made; finally, start the engine and ensure that the time has been set correctly!

Watch the video!


by ScegliAuto

More videos