|
Do it yourself
| |||
| ||||
How do I remove the outer door panel of the Smart Forfour?
Model: Smart Smart
454, Fourfour1
- Years 2004-2006
In order to remove the outer door panel of the Smart Forfour, the side trim of the outer door handle must be removed. In this way it will be possible to unscrew the side screw of the door mechanism, so that the actuator is removed by disconnecting the connector. Now you will have to remove the triangular panel in correspondence with the external rearview mirror, so that the screws that fix it can be unscrewed. Once the mirror has therefore been removed, unscrew the last screws that secure the outer panel in its upper part: finally, the panel can be detached from the door, replacing it with a new one.
Posted on 2 May 2022 by ScegliAuto
Video tutorial
Related tutorials
Smart
(1998-2007 /
450)
In this video tutorial we will see how the main steps and instructions can be used to remove the external door panel of a Smart Forfour. First we ope…
Smart
(1998-2007 /
450)
Today, you will see the instructions that will allow you to remove the inner and outer door panel of the front door of the Smart Fortwo. First, open …
Smart
(2007-2015 /
451)
Let's see the replacement of the outer door panel of a Smart Fortwo. We open the car door to access the screws for tightening the cover panel. Unscre…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Rear Light and Bulbs on a Ford Focus Year 2000
To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |