Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the ball joint on the Smart Fortwo

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

See other generations:
This video is currently unavailable

Follow these instructions to remove and replace the ball joints on the Smart Fortwo. First, lift the vehicle and remove the front wheel; then unscrew the screws securing the front bumper to remove it, as shown in the video.

At this point, unscrew the pin of the wishbone, disconnecting it from the braking system; now remove the old ball joint and replace it with the new one, using the original spare part, following the video tutorial to the end for reassembly!


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to replace the front windshield wipers on the Smart ForTwo?
How to replace the front windshield wipers on the Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial we can see how to replace the front windshield wipers on the Smart ForTwo, an extremely simple and quick operation. First of all, ma…
How to Remove the Heater Radiator in the Smart ForTwo 450?
How to Remove the Heater Radiator in the Smart ForTwo 450?
Smart (1998-2007 / 450) In this video tutorial, you will see how to remove the heater radiator in the Smart ForTwo 450. To do this, you need to disassemble the entire front …
How to Remove the Gear Knob from a Smart ForTwo
How to Remove the Gear Knob from a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before you begin, sit in the driver's seat of your Smart ForTwo. To carry out this removal safely, it is strongly recommended to switch off the engin…

Replacing the Gear Knob on the Renault Espace

The following steps will show you how to remove and replace the gear knob of the manual gearbox on the Renault Espace. First, get in the vehicle and start by removing the small upper cover of the knob; to remove it, simply pull the gear knob upwards with force to detach it from the lever, as shown in the video. At this point, remove and replace the gear gaiter if necessary, installing the new one; finally, insert the new gear knob, securing it properly onto the lever (ensure there is no play between the lever and the knob).

Watch the video!


by ScegliAuto

More videos