Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the outside handle of the Smart 450?

Model: Smart Smart 450 - Years 1998-2007
Part: Handle

In order to remove the external handle of the Smart 450, the door must be opened and the bolt located on the inside, corresponding to the external handle, must be unscrewed. After removing the aforementioned screw, it will be necessary to pry with an object to detach the handle, releasing its fixing clips. Consequently, to remove the handle completely, the connector at the rear must be disconnected. Once the old handle has been removed, it will be possible to connect the new handle to the connector and insert it into its housing, fixing it with the appropriate screw.

Posted on 17 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the outside handle of the Smart 450?
How do you remove the outside handle of the Smart 450?
Smart (1998-2007 / 450) In order to remove the external handle of the Smart 450, the door must be opened and the bolt located on the inside of the door, at the external hand…
How do you replace the internal handle of the Smart 450?
How do you replace the internal handle of the Smart 450?
Smart (1998-2007 / 450) In order to replace the interior handle of the Smart 450, you need to pry with an object to detach the triangular cover on the inside of the mirror. …
How do you replace the door handle cable of the Smart Fortwo 450?
How do you replace the door handle cable of the Smart Fortwo 450?
Smart (1998-2007 / 450) We can see in this video how to remove the handle from the interior door of a Smart Fortwo 450: first of all, we need to unscrew the screw that holds…

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos