Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the wheel of the Smart Fortwo 453

Model: Smart Smart 453 - Years 2014-2022
Part: Wheel

Let's see in this short video the main guide to disassemble and replace the front wheel, but also applies to the rear wheel, of the Smart Fortwo 453. First of all, let's position the wheel blocks and start lifting the car with the jack; then we use the key supplied to unscrew the bolts of our wheel, as shown in the video. At this point, remove the wheel and replace it with the spare one, inserting it correctly and tightening the bolts well and crosswise; we just have to reposition all the material on the luggage compartment!

Posted on 30 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front turn signal bulb of the Smart Fortwo 453
How to replace the front turn signal bulb of the Smart Fortwo 453
Smart (2014-2022 / 453) If you own a Smart Fortwo 453 and want to replace one of the front turn signal bulbs by yourself, just follow the following guide and apply the descr…
Smart Fortwo 453 headlight bulb replacement
Smart Fortwo 453 headlight bulb replacement
Smart (2014-2022 / 453) In this short and simple guide we will see the main instructions for removing and replacing the headlight bulb of the Smart Fortwo 453. First we open…
Instructions for removing the rear bumper Smart Fortwo 453
Instructions for removing the rear bumper Smart Fortwo 453
Smart (2014-2022 / 453) Let's see in this video the main instructions to be able to remove the rear bumper on a Smart Fortwo 453, in simple and quick steps. First we are goi…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2014-2022 - Where is the Smart spare wheel located? Read answer

How to Change the H7 Headlight Bulb on an Audi A3

When replacing the front headlight bulbs, choosing the right bulbs is certainly the first hurdle to overcome: halogen, blue white light, xenon, or LED. Once you have made your choice, installing the new bulb can be done without removing the headlight. Simply open the front bonnet, locate the protective cap of the bulb holder, and press on the corresponding latch to remove it. Then grasp the bulb's power connector and pull it out along with the bulb itself, disconnect the connector, fit the new bulb, and press it into its seat until it clicks into place.

Watch the video!


by ScegliAuto

More videos