Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to fill the wiper reservoir of the Smart ForTwo

Model: Smart Smart 450 - Years 1998-2007

In this video it is possible to see, as well as listen to the commentary, the procedure for filling and bringing the windshield wiper reservoir to the right level. In this specific case, the above operation is carried out on the Smart ForTwo. It is necessary to remove the grille located on the left side of the front bonnet and to do this, it will be necessary to unscrew the fixing screw with a screwdriver. After that, remove the lid of the tray and proceed with filling, preferably with the help of a funnel to prevent the water from escaping. It is advisable to add anti-limescale, so as to prevent blockages in the pipes and nozzles. Very simple operation to perform.

Posted on 10 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to top up the washer fluid on Smart Fortwo 453
How to top up the washer fluid on Smart Fortwo 453
Smart (2014-2022 / 453) Let's see in this video how to top up the washer fluid on a Smart Fortwo 453 third series, but also on previous models. First of all it is necessary …
How to replace the wipers of the Smart Fortwo
How to replace the wipers of the Smart Fortwo
Smart (2014-2022 / 453) This short and simple guide will show us how to disassemble and replace the windshield wipers (front and rear) of the Smart Fortwo. First of all, let…
Replacement of the wipers of the Smart Fortwo 451
Replacement of the wipers of the Smart Fortwo 451
Smart (2007-2015 / 451) Let's see in this short and simple video how to remove and replace the wiper blades of the Smart Fortwo 451, but also of the 453. First, let's move t…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - Where is the lateral acceleration sensor located in a Smart 450? Read answer

How to Remove the Brake Disc on Mitsubishi Pajero

How to remove the brake disc along with the brake pads on a Mitsubishi Pajero? First, lift the vehicle on a column lift to a suitable height for working. Next, remove the wheel (using a telescopic spanner or air drill) with the respective bolts. Undo the locking bolt of the brake caliper, and remove it from the caliper support. Remove the caliper support from the wheel hub using a socket spanner. Once the brake disc is free, undo the screws with a fixed spanner and detach the disc from the wheel hub. Disconnect the various wiring and brake fluid pipes from the wheel assembly. Replace them with new parts (always use original and compliant parts). Prepare to install the new disc along with the respective pads, brake caliper, caliper support, etc.

Watch the video!


by ScegliAuto

More videos