Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Intake Duct of the Smart Roadster

Model: Smart Smart Roadster, 452 - Years: 2003, 2004, 2005

See other generations:
Video tutorial

This guide explains how to remove the main intake duct of the Smart Roadster, following the instructions below. First, access the engine bay and start by unscrewing all the screws on the sides of the intake duct to detach it. Next, disconnect the side hoses and the various electrical connectors for the sensors as shown in the video.

At this point, remove the throttle valve located on the left side of the duct. Replace the intake duct, applying the reverse procedure for reassembly!


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Vents of the Smart Roadster
How to Replace the Air Vents of the Smart Roadster
Smart (2003-2005 / Roadster, 452) This brief and simple guide shows how to disassemble and replace the dashboard air vents of the Smart Roadster, following the instructions below. Fir…
How to Replace the Clutch Actuator on the Smart Roadster?
Smart (2003-2005 / Roadster, 452) You can replace the clutch actuator on the Smart Roadster by lifting the car to access the components underneath: once the vehicle is lifted, you can…
How to Replace the Roof of the Smart Roadster
How to Replace the Roof of the Smart Roadster
Smart (2003-2005 / Roadster, 452) To replace the roof of the Smart Roadster, open the bonnet and unscrew the fixing screws of the internal compartment to access the battery underneath…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos