Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to change the transmission oil of the Smart 450

Smart - Video tutorial

Model: Smart Smart 450 - Years 1998-2007
Part: Gear oil
Operation: How to change the transmission oil of the Smart 450

The guide shows how to change the transmission oil of the Smart 450. The first step is to lift the vehicle or the rear of the vehicle as the transmission is rear. After locating the drain bolt, unscrew it with a 7mm wrench. Arrange a container to collect the used fluid. Unscrew the transmission filler bolt with an 8 mm wrench and top up with oil. The correct level of lubricant is reached when the fluid begins to flow from the hole. Close the cap and clean the oil residues.


Posted on 3 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Smart 2014-2021 - How often does the gearbox oil of the Smart fortwo 453 need to be changed? Read Answer
    • Smart 1998-2007 - How much oil in the gearbox of the Smart? Read Answer
    • Smart 2007-2015 - How many liters of oil are needed for the complete change on the Smart 451? Read Answer
    • Smart 2007-2015 - How much oil do you need to change the Smart 451? Read Answer
    • Smart 2007-2015 - What is the right amount of gear oil for the Smart 451? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos