Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Smart ForTwo fuse scheme?

Model: Smart Smart 454, Fourfour1 - Years 2004-2006
Part: Fuse box

In this video we can see the position of the fuse boxes in the Smart ForTwo, as well as the relative diagrams, to be consulted in case we need to check the fuse of a malfunctioning device. As we can see, the first and only box is located inside the passenger compartment, in the pedal area, accessible from under the dashboard. In this box we can find all the fuses of every electrical device in the car. Remember to always replace a broken fuse with a spare of equivalent amperage, so as not to damage the user device.

Posted on 16 September 2022 by ScegliAuto

Video tutorial

Related tutorials

Diagram and location of the fuse boxes of the Smart Fortwo
Diagram and location of the fuse boxes of the Smart Fortwo
Smart (2007-2015 / 451) In this short and simple guide we will see where to find the fuse boxes, as well as where to find the diagram, of the Smart Fortwo. First of all, we …
Fuse box diagram and location for the Smart Fortwo.
Fuse box diagram and location for the Smart Fortwo.
Smart (2007-2015 / 451) In this short guide, we will see the information related to the fuse scheme and positioning of the Smart Fortwo. First, let's get on board the passen…
Diagram and positioning of the fuses of the Smart Fortwo.
Diagram and positioning of the fuses of the Smart Fortwo.
Smart (2007-2015 / 451) In this guide we will see the information related to the positioning and the fuse diagram of the Smart Fortwo. The fuse box is located on board the v…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Replace the Lift Supports on a Porsche 911

How to remove and replace the lift supports for the hood on a Porsche 911? Let's see how to replace them in this video: Lift the hood and secure it. Use a screwdriver or metal lever to detach the clips that hold the lift support at both ends (or unscrew the mounting pins). Install the new part onto the sheet metal of the front trunk, securing the lift support with the clips/pins. Proceed in the same manner for the removal/installation of the opposite lift support. Finally, test the gas springs installed earlier.

Watch the video!


by ScegliAuto

More videos