Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to remove the interior door panel of the Smart 450

Smart - Video tutorial

Model: Smart Smart 450 - Years 1998-2007
Part: Door
Operation: How to remove the interior door panel of the Smart 450

In this video tutorial you can see how it is possible to remove the internal door panel of the Smart 450, following simple steps that will guide you to the correct management of your vehicle without resorting to the assistance of an authorized mechanic. First you have to work safely then start by disconnecting the battery terminals. Then using a screwdriver you have to unscrew the screws located inside, in the door panel, then you have to remove the rubber gasket that you see near the window glass. At this point, using a plastic lever, you have to unhook all the clips in the door. Finally, you have to remove the panel by pulling with your hands so that it detaches from its seat. Replace the panel with a new one and reassemble all parts in reverse order.


Posted on 22 September 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Smart 2007-2015 - Why doesn't the central locking system of the Smart Fortwo work? Read Answer
    • Smart 2014-2022 - Why don't the doors of the Smart 453 open? Read Answer
    • Smart 2014-2022 - Why does the door of the Smart not close? Read Answer
    • Smart 2007-2015 - Why does the door of the Smart not close? Read Answer
    • Smart 1998-2007 - Why is the door of the Smart 450 locked? Read Answer
    • Smart 2014-2022 - Why does the door of the Smart not open from the outside? Read Answer
    • Smart 2004-2006 - How to remove the interior trim of the electric Smart Forfour door? Read Answer
    • Smart 1998-2007 - Why does the door of the Smart 450 not close? Read Answer
    • Smart 1998-2007 - How to remove the tailgate on the Smart 450? Read Answer
    • Smart 2007-2015 - Why does the door of the Smart not close? Read Answer
    • Smart 2007-2015 - Why does the door of the Smart not close? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos