Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the outer door panel of the Smart 450?

Model: Smart Smart 450 - Years 1998-2007
Part: Door trim panel

To remove the outer door panel of the Smart 450, leverage the area around the external handle so that it can be completely removed, disconnecting the connector as well. Once the handle has been removed, detach the seal located at the base of the window, allowing you to free the outer panel. When the panel is freed, you can completely remove it from the door and replace it with a new spare part. Once this is installed, you can also reposition the outer door handle.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Outer Door Panel of the Smart 450?
How to Remove the Outer Door Panel of the Smart 450?
Smart (1998-2007 / 450) To remove the outer door panel of the Smart 450, open the door and detach the side cover near the handle to unscrew the underlying screw. Once this s…
How to remove the outer door panel of the Smart 451?
How to remove the outer door panel of the Smart 451?
Smart (1998-2007 / 450) To remove the outer door panel of the Smart 451, first loosen the screws securing the external mirror to gain more manoeuvring space. Now, begin deta…
How to Remove the Door Panel of the Smart 450?
How to Remove the Door Panel of the Smart 450?
Smart (1998-2007 / 450) To remove the inner door panel of the Smart 450, detach the triangular cover near the external mirror. Once removed, unscrew the underlying screws an…

    Frequently Asked Questions

    • Smart 2014-2022 - How to remove the door panel in the Smart Fortwo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos