Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil of the Smart 451

Model: Smart Smart 451 - Years 2007-2015
Part: Engine oil

In this our new guide dedicated to your Smart 451 (year 2007-2015) we will find out what are the steps to take if you want to change the engine oil independently and above all in safety. First turn off the car and let it cool down sufficiently so that you have to deal with low oil temperatures. Immediately afterwards, lift the vehicle with a suitable hydraulic jack and locate the oil pan. Unscrew the cap, place a basin underneath and let all the used oil run out. Then screw the cap back on and move to the rear of the car. Raise the hood, remove the oil pan cap and pour the new fluid into it.

Posted on 8 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How do I change the gear oil of the Smart 451?
How do I change the gear oil of the Smart 451?
Smart (2007-2015 / 451) To be able to change the gear oil of the Smart you have to go to access the lower part of the engine compartment, which is located in the rear part o…
Setting the time on a Smart 451.
Setting the time on a Smart 451.
Smart (2007-2015 / 451) In today's very short video tutorial, you will see the method necessary to change the time of the onboard computer on your Smart 451, a model produce…
How to Change the Oil in a Smart
How to Change the Oil in a Smart
Smart (2007-2015 / 451) First, locate the oil reservoir, which is under the panel of the small boot on the right. Next, remove the cap from the sump located under the engine…

Other guides you may be interested in

How to Remove the Glow Plugs on a Mercedes E-Class

Do you want to remove the glow plugs on a Mercedes E-Class and don't know how? Let's see in this detailed video how to proceed with the removal. Pull the engine hood release lever located on the bottom left of the dashboard and lift the front hood, securing it. Remove the soundproofing panel that covers the engine. Use a socket wrench to unscrew the glow plug, pull it out of the cylinder head (perform the same operation on the other glow plugs). Take the new glow plug and insert it into the cylinder head using the socket wrench. Finally, reinstall the plastic cylinder head cover panel.

Watch the video!


by ScegliAuto

More videos