Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Forfour
    4. : How to reset the services light on the Smart ForFour

Smart Forfour - Video tutorial

Model: Smart Forfour MK 1, W454 - Years 2004-2006
Part: Checks and maintenance
Operation: How to reset the services light on the Smart ForFour

This video tutorial shows the procedure for restoring the service warning light on Smart ForFour produced from 2004 to 2006. This procedure can be useful if this warning light remains on after having performed the coupon. The procedure for resetting is: first you need to turn off the ignition, after having done this you need to press the reset button located above the speedometer, to then turn on the ignition. After turning on the ignition you have to wait about 10 seconds, once these 10 seconds have passed the reset will be complete and the warning light will no longer be there.


Posted on 13 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Forfour 2014-2021 - How do you reset the service light in the Smart Forfour? Read Answer
    • Forfour 2014-2021 - What problems can be encountered with the automatic transmission of the Smart Forfour? Read Answer
    • Forfour 2004-2006 - What is the problem with the Smart ForFour clutch actuator? Read Answer
    • Forfour 2004-2006 - How to solve the problem of the clutch actuator of the Smart Forfour? Read Answer
    • Forfour 2014-2021 - What are the problems of the Smart ForFour? Read Answer
    • Forfour 2014-2021 - When should the Smart Forfour be serviced? Read Answer
    • Forfour 2014-2021 - What are the lights on the Smart Forfour? Read Answer
    • Forfour 2004-2006 - What does the service indicator light on a Smart ForFour mean? Read Answer
    • Forfour 2014-2021 - What are the lights of the 2020 Smart Forfour? Read Answer
    • Forfour 2014-2021 - Where is the paint code of the Smart Forfour located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos