Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate ESP on Smart

Model: Smart Smart 451 - Years 2007-2015

If we intend to deactivate the ESP system on this car model, in the description we provide below we will find all the indications and procedures to follow to perform this operation. First of all, access the cabin, then proceed to locate the diagnostic socket located on the left side of the dashboard. Then, equip yourself with a diagnostic system that we will connect to the ODBII socket. Then proceed to select the car model and wait for the connection with the control unit, locate and select the ESP command and proceed with its deactivation.

Posted on 22 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate ESP on Smart 451
How to deactivate ESP on Smart 451
Smart (2007-2015 / 451) ESP is the acronym for Electronic Stability Program, and in Italy it is also known as ESC, which stands for Electronic Stability Control. It is turne…
How to disable ESP on Smart Fortwo
How to disable ESP on Smart Fortwo
Smart (2007-2015 / 451) Let's briefly see in this guide the steps that will allow us to disable the ESP system or traction control on the Smart Fortwo; it is recommended nev…
How to deactivate the ESP system in the Smart ForTwo?
How to deactivate the ESP system in the Smart ForTwo?
Smart (1998-2007 / 450) In this video we can see how to disable the ESP system in the Smart ForTwo 450, valid for each version of this model. Since there is no dedicated com…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - Where is the lateral acceleration sensor located in a Smart 450? Read answer

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos