Do it yourself
Frequently asked questions about cars and motorcycles

Where is the Cabin Filter Located on the Smart ForTwo and How to Replace It?

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Cabin air filter

See other generations:
Video tutorial

This video shows where the cabin filter is located in the Smart ForTwo and how to proceed if you need to replace it. As shown, it is located in the front compartment of the vehicle, and accessing it can be difficult without removing the entire bumper.

After removing the small indicated grille, open the long rectangular flap and extract the old filter from the housing, which should be cleaned of any dirt residue.

Once this is done, you can insert the replacement, ensuring to respect its orientation, usually indicated along its edge.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

Smart (2007-2015 / 451) To replace the cabin air filter on your Smart Fortwo yourself, simply follow the procedure described below. First, purchase a new filter ensuring it …
Smart (2007-2015 / 451) Before you start, enter the cabin of your Smart ForTwo. Begin by unclipping the clips that secure the cabin air filter cover, located near the driver…
Smart (2007-2015 / 451) Maintaining optimal air quality inside your Smart Fortwo is the job of the cabin air filter. For this reason, it is essential to replace it periodica…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos