Do it yourself
| ||||
|
Smart - Video tutorial
Model: Smart Smart
Roadster, 452
- Years 2003-2005 In order to replace the rear brake pads of the Smart Roadster, you need to lift the car with a jack or a lift so that the corresponding wheel is not in contact with the ground. Once the wheel is lifted, you will need to unscrew the bolts that secure it to its hub, remove it, and access the components in its rear part. After the wheel is removed, you will need to remove the drum and access the underlying brake pads: these will need to be removed from their housing by unscrewing the fixing bolts and freeing them from the corresponding spring.
Posted on 29 July 2023 by ScegliAuto
Other guides that may interest you
|
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.037
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |