Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stereo from the Smart 453

Model: Smart Smart Various
Part: Car stereo

Removing the radio from this vehicle is very simple, but requires some care as the plastics are sturdy yet more delicate due to their light colour. Use only plastic spatulas; avoid metallic materials that can scratch the surfaces, which would inevitably leave visible marks. Use the spatulas to lever out the four clips on the sides, and the trim will come away, but first, remove the smartphone holder. This is straightforward; just pull it towards you. Once the trim is removed, you will see four Torx screws on either side of the radio. Simply unscrew them, and the job is done.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Vileda Turbo Smart?
How to Dismantle the Vileda Turbo Smart?
Smart Smart Various The Vileda Turbo Smart is the new floor cleaning system featuring a pedal-operated spin function located inside the water collection bucket, designed…
Resetting the Smart Service light
Resetting the Smart Service light
Smart Smart Various After changing the engine oil and filter of the Smart car, we reset the module that reminds us to make this replacement, with a reminder on the instr…
How to remove and seal the rear window of a Smart 450
How to remove and seal the rear window of a Smart 450
Smart Smart Various To do this operation, we need to start by removing the seal from the inside: we can see that there is a small tab in the corner that we can remove us…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos