Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : Replacement of the gearbox oil for the Smart Fortwo.

Smart - Video tutorial

Model: Smart Smart 451 - Years 2007-2015
Part: Gear oil
Operation: Replacement of the gearbox oil for the Smart Fortwo.

In this guide, we will discover the steps necessary to replace the transmission oil of the Smart Fortwo, following the instructions below. First, let's locate the rear differential transmission; then, using a torx key, we unscrew the oil fill and drain plugs of the gearbox, allowing the fluid to drain into a container for about ten minutes, as shown in the video. At this point, we perform a refill with new gearbox oil; we pour the appropriate oil, with the specifications indicated in the user manual, ensuring the correct quantity is poured!


Posted on 20 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Smart 2014-2021 - How often does the gearbox oil of the Smart fortwo 453 need to be changed? Read Answer
    • Smart 1998-2007 - How much oil in the gearbox of the Smart? Read Answer
    • Smart 2007-2015 - How many liters of oil are needed for the complete change on the Smart 451? Read Answer
    • Smart 2007-2015 - How much oil do you need to change the Smart 451? Read Answer
    • Smart 2007-2015 - What is the right amount of gear oil for the Smart 451? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos