Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine mount in the Smart 451?

Model: Smart Smart 451 - Years 2007-2015
Part: Engine mount

When using the car, if at some point you notice a noise and vibration coming from the engine, it is advisable to check the engine support bracket. It is made of metal, with holes at both ends for bolting it, and there is rubber around the two holes to absorb the engine vibrations. The video shows the tools to use, namely a ratchet wrench with a 13 mm socket and a battery-powered screwdriver. The rear part of the car needs to be lifted and the work is done underneath it, which is a quick task as the replacement does not involve any particular difficulties.

Posted on 10 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to install the armrest of the Smart 451?
How to install the armrest of the Smart 451?
Smart (2007-2015 / 451) In order to install the armrest on the seat of the Smart 451, the backrest of the corresponding seat must be tilted forward, so that the seat upholst…
How do I replace the rear light bulb on the Smart 451?
How do I replace the rear light bulb on the Smart 451?
Smart (2007-2015 / 451) In order to replace the rear light bulb of the Smart 451, the tailgate of the luggage compartment must be lowered and the plastic cover located on th…
How to replace the central engine mount in the Smart ForTwo?
How to replace the central engine mount in the Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial, we can see how to replace the central engine mount in the Smart ForTwo, a very simple and quick operation. First of all, we lift bo…

Other guides you may be interested in

How to Remove the Fuel Pump from the Tank on an Opel Astra

How to remove the fuel pump from the tank on an Opel Astra? First, disconnect the battery cables. Next, remove the rear seat cushions from the car. Use a socket spanner to unscrew the securing screws of the metal cap (located on the metal panel), then remove it from its seat. Use absorbent paper around the perimeter to soak up any liquid leaks. Unscrew the large securing bolt of the fuel pump (if present on the model), disconnect the power connectors and the liquid circulation pipes. Extract the floating fuel pump from its seat along with any attached parts. Finally, refit a new piece.

Watch the video!


by ScegliAuto

More videos