Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Position and diagram of the fuses in the Smart Fortwo.

Model: Smart Smart 450 - Years 1998-2007
Part: Fuse box

Let's briefly see the main steps useful for finding the fuse box of the Smart Fortwo; we will also see how to find the fuse diagram and chart. First, we open the passenger side door and remove the plastic partition that we find below, under the glove compartment; we will then find the fuse box right behind it, as shown in the video. At this point, we use the owner's manual to find the fuse diagram and chart, associated with a code and its corresponding amperage, replacing any faulty fuse with a new one if necessary!

Posted on 21 November 2023 by ScegliAuto

Video tutorial

Related tutorials

Location and layout of the Smart Fortwo fuse box
Location and layout of the Smart Fortwo fuse box
Smart (2007-2015 / 451) Let's see in this guide where to find the layout and location of the Smart Fortwo fuse boxes, following the instructions below. First of all we get o…
Fuse box diagram and location for the Smart Fortwo.
Fuse box diagram and location for the Smart Fortwo.
Smart (2007-2015 / 451) In this short guide, we will see the information related to the fuse scheme and positioning of the Smart Fortwo. First, let's get on board the passen…
Fuse box layout and positioning of the Smart Fortwo
Fuse box layout and positioning of the Smart Fortwo
Smart (2007-2015 / 451) Today we will see the diagram and positioning of the fuse compartments of the Smart Fortwo, in simple and quick steps. First, we open the front door …

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Remove the Brake Disc on Mitsubishi Pajero

How to remove the brake disc along with the brake pads on a Mitsubishi Pajero? First, lift the vehicle on a column lift to a suitable height for working. Next, remove the wheel (using a telescopic spanner or air drill) with the respective bolts. Undo the locking bolt of the brake caliper, and remove it from the caliper support. Remove the caliper support from the wheel hub using a socket spanner. Once the brake disc is free, undo the screws with a fixed spanner and detach the disc from the wheel hub. Disconnect the various wiring and brake fluid pipes from the wheel assembly. Replace them with new parts (always use original and compliant parts). Prepare to install the new disc along with the respective pads, brake caliper, caliper support, etc.

Watch the video!


by ScegliAuto

More videos