Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the air conditioner controls from the Smart car?

Model: Smart Smart 451 - Years 2007-2015
Part: A/C controls

In order to remove the air conditioning controls of the Smart car, you need to pry with an object so that you can detach the molding located at the top of the panel and also the radio located at the bottom. At this point, it will be possible to loosen the screws that secure the control panel at its top and bottom: by doing so, the panel can be extracted from its housing and the connectors at the back can be disconnected. Now, the new control panel can be properly connected and fixed to its housing.

Posted on 13 February 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the timing chain of the Smart car?
How do you replace the timing chain of the Smart car?
Smart (1998-2007 / 450) In order to replace the timing chain of the Smart car, you need to remove the rear wheels of the vehicle so that you can access the side of the engin…
How do you replace the cabin filter on the Smart 453?
How do you replace the cabin filter on the Smart 453?
Smart (2014-2022 / 453) In order to replace the cabin filter of the Smart 453, you have to remove the side plastic cover of the footrest compartment, on the driver's side. O…
How do I remove the outer door panel of the Smart 450?
How do I remove the outer door panel of the Smart 450?
Smart (1998-2007 / 450) In order to remove the external door panel of the Smart 450, it is necessary to pry into the seat of the external handle, so that it can be completel…

Other guides you may be interested in

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos