Do it yourself
| ||||
|
Smart - Video tutorial
Model: Smart Smart
450
- Years 1998-2007 In order to remove the rear bumper on the Smart car, it is necessary to open the rear hatch so that you can access the screws that secure the bumper from the top: all these screws must be unscrewed and completely removed. After removal, it will be possible to loosen the screws that secure it from the bottom and then remove those located inside the rear wheel arches; now it will be possible to completely detach the old bumper, so that the new one can be inserted and secured with the removed screws.
Posted on 8 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |