Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Smart ForTwo?

Model: Smart Smart 451 - Years 2007-2015
Part: Headlight bulb

In this tutorial, we can see how to replace the front headlight bulbs in the Smart ForTwo, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then locate the two levers on the sides of the front grille, activate them and open the hood. Next, grab the bulb holder, rotate it slightly counterclockwise and remove it from the headlight. At this point, all that remains is to disconnect the old bulb, connect the replacement and reassemble everything following the reverse procedure. If necessary, repeat the operation on the opposite side.

Posted on 10 March 2024 by ScegliAuto

Video tutorial

Related tutorials

Replace low beam lights on Smart Fortwo
Replace low beam lights on Smart Fortwo
Smart (2007-2015 / 451) Do we want to remove the damaged bulbs of the Smart Fortwo? To begin we remove the front hood of the Smart and find the rear cover of the headlights.…
How to Change the Front Headlight Bulbs on a Smart Fortwo
How to Change the Front Headlight Bulbs on a Smart Fortwo
Smart (2007-2015 / 451) Do you want to change the damaged front headlight bulbs on your Smart Fortwo? Let’s see how to proceed. Open the plastic levers located at the sides …
Replacement of the front headlight bulbs of the Smart Fortwo - Forfour
Replacement of the front headlight bulbs of the Smart Fortwo - Forfour
Smart (2014-2022 / 453) Today we will discover the instructions that will allow us to disassemble and replace the bulbs of the front headlight of the Smart Fortwo and Forfou…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos