Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the steering wheel of the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Steering wheel

We will briefly see how to disassemble and replace the steering wheel and its airbag of the Smart Fortwo, in simple steps. First of all, we get on board the car and start removing the steering wheel airbag; to do this, push on the rear holes, then disconnect the electrical connector, as shown in the video. At this point, unscrew the central screw of the steering wheel, in order to remove it in a perfectly straight position, as shown in the video. Now we install the new steering wheel, reassembling and connecting the airbag, following the video tutorial until the end!

Posted on 22 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Steering Wheel of a Smart Fortwo
Removing the Steering Wheel of a Smart Fortwo
Smart (1998-2007 / 450) In this video, you will see how to remove the steering wheel of the small Smart Fortwo. Before disassembling, position the steering wheel straight wi…
How to install the steering wheel airbag of the 2016 Smart Fortwo
How to install the steering wheel airbag of the 2016 Smart Fortwo
Smart (2014-2022 / 453) Today we will explain how to mount the steering wheel airbag on a 2016 Smart Fortwo car. Before performing this operation, it is necessary to check t…
Removing the Radio on a Smart Fortwo
Removing the Radio on a Smart Fortwo
Smart (2007-2015 / 451) Remove the damaged radio from a Smart Fortwo. Take off the trim around the stereo using a plastic lever (where the air vents are located) and detach …

Other guides you may be interested in

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos