Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Steering Wheel of a Smart Fortwo

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Steering wheel

See other generations:
Video tutorial

In this video, you will see how to remove the steering wheel of the small Smart Fortwo. Before disassembling, position the steering wheel straight with the wheels to make it easier to adjust when reassembling.

Now, unscrew the screws located underneath the steering wheel (in the plastic): at this point, pull the steering wheel towards you to remove it. Disconnect the airbag connector and the horn cable. Ensure everything is in order and proceed with reassembling the steering wheel (either the same or a new one, depending on your needs).

Make sure it is aligned, and you're done!


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Smart (2007-2015 / 451) We will briefly see how to remove and replace the steering wheel and its airbag on the Smart Fortwo in simple steps. First, get into the vehicle and …
Smart (2004-2006 / Fourfour1, 454) Before you begin, sit in the driver's seat of your Smart ForTwo. To carry out this removal safely, it is strongly recommended to switch off the engin…
Smart (2007-2015 / 451) Remove the damaged radio from a Smart Fortwo. Take off the trim around the stereo using a plastic lever (where the air vents are located) and detach …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos