Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you deactivate the traction control of the Smart car?

Model: Smart Smart 450 - Years 1998-2007
Part: Checks and maintenance

To deactivate the traction control of the Smart, you need to open the dedicated fuse box located inside the dashboard, right below the steering column: here you will be able to identify the fuse that controls the traction control system. This fuse must be completely removed from its housing, effectively deactivating the ESP system: at this point, you can turn on the instrument panel and drive the car to verify that the issue has been deactivated.

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate the traction control on the Smart car?
How do you deactivate the traction control on the Smart car?
Smart (2014-2022 / 453) To deactivate the traction control of the Smart, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. …
How do you deactivate the traction control of the Smart car?
How do you deactivate the traction control of the Smart car?
Smart (2007-2015 / 451) The deactivation of traction control on the Smart can be done by turning on the instrument panel, inserting the ignition key into the corresponding s…
How do you deactivate the traction control of the Smart car?
How do you deactivate the traction control of the Smart car?
Smart (2014-2022 / 453) To completely disable the traction control of the Smart, you will need to turn on the instrument panel by inserting the ignition key into the appropr…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - What is the problem with the Smart 450's steering angle sensor? Read answer

How to Replace the Front Headlamp on a Fiat Bravo

First, release the bonnet using the lever, then lift it. To remove the headlamp, you will need to dismantle a significant part of the front bumper. Start by removing the inner wheel arch liner to access the screw that secures the bumper to the wing. Next, remove the screws located on the top of the bumper. This will allow you to unscrew all the bolts securing the headlamp, including the one hidden by the bumper. Finally, disconnect the connector at the back of the headlamp and carry out the necessary replacements.

Watch the video!


by ScegliAuto

More videos