Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front hood and grille of the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Body

The following steps will show us how to remove the front hood and plastic bumper grille of the Smart Fortwo. First, let's move to the front of the vehicle and start pulling the two plastic levers on the sides of the grille, releasing the front hood lock to remove it; then unscrew the fastening screws found on the top of the grille, in order to remove it as well, as shown in the video. At this point, let's reassemble the bumper grille in order, fixing it correctly, and finally the front hood of the car!

Posted on 28 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to open the front hood of a Smart ForTwo
How to open the front hood of a Smart ForTwo
Smart (2007-2015 / 451) Before we can start, we will have to get out of the cockpit of our Smart ForTwo, and then, we will have to head towards the front of the car. So let'…
How to open the front hood of the Smart Fortwo
How to open the front hood of the Smart Fortwo
Smart (2007-2015 / 451) In this video tutorial we will see how to open, in simple steps, the front hood of a second series Smart Fortwo, without the use of any tools. To do …
Remove the central grille on Smart Fortwo
Remove the central grille on Smart Fortwo
Smart (2007-2015 / 451) How to remove the central grille (black plastic) on the front bumper of a Smart Fortwo? Once the front hood of the car has been opened and removed: w…

Other guides you may be interested in

How to Install an Additional Horn on a Fiat Punto

It may happen that the original horn starts to produce a sound that is noticeably underwhelming; at this point, you can decide to install a pair of sounders connected in parallel with the original one to achieve a more assertive sound. The installation is very easy, but it is important to direct the sound output towards an air intake, so you need to shape a support bracket to fix it to the slam panel with a single bolt. Once secured, take the positive power from the fuse box using a 2.5 mm² cable, tapping into the purple wire directly under the relay while connecting the ground directly to the negative terminal of the battery.

Watch the video!


by ScegliAuto

More videos