Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Ssangyong Rexton?

Model: SsangYong Rexton MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Ssangyong Rexton, first inflate the tyres to the recommended pressure value: this value is found on the sticker attached to the driver's door pillar. Once the tyres are correctly inflated, turn on the ignition and press the button in the centre for a few seconds until the display shows "F -- --". Now press the button again to check the pressure of the front tyres; the display will show "R -- --" and you can repeat the process to check the pressure of the rear wheels.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure light on the Ssangyong Rexton?
How to reset the tyre pressure light on the Ssangyong Rexton?
SsangYong Rexton (2017-2026 / MK 2) To clear the tyre pressure light on the Ssangyong Rexton, inflate the tyres to the optimal pressure value, which is indicated on the sticker affixed …
Guide to Adjusting the Timing Chain of the Ssangyong Rexton
Guide to Adjusting the Timing Chain of the Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) Today, we will explore the main steps for adjusting the timing chain of the Ssangyong Rexton, following the instructions provided below. To access th…
Replacing the Diesel Filter on SsangYong Rexton 2.2 Diesel
Replacing the Diesel Filter on SsangYong Rexton 2.2 Diesel
SsangYong Rexton (2001-2017 / MK 1) In this video tutorial, you will see the main steps to remove and replace the diesel filter on a SsangYong Rexton 2.2 Diesel. First, open and lift th…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos