Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. SsangYong
    3. :
  3. Actyon
    4. : Jaw disassembly on Ssangyong Actyon

SsangYong Actyon - Video tutorial

Model: SsangYong Actyon MK 1 - Years 2006-2018
Part: Brake pads
Operation: Jaw disassembly on Ssangyong Actyon

Let's replace the rear brake shoes of a Ssangyong Actyon, let's see how they change. We lift the car on a jack up to the desired height, immediately after we go to remove the rim with the respective pins. We unscrew the locking pins of the drum brake, remove the same from the wheel holder. We disassemble the brake pads to be replaced from the wheel hub caliper, remove the brake caliper. We mount the new brake shoes, mount the drum. We tighten all the pins and mount the wheel. Let's get ready to carry out the same operations on the other drum brake.


Posted on 4 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos