Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the lumbar support of the front seat of the Subaru Outback

Model: Subaru Outback BS, MK 5 - Years 2014-2019

Today we will see the instructions useful for disassembling and repairing the lumbar support of the front seat of the Subaru Outback. First of all, we open the rear door and start accessing the inside of the seat, using the hinge found at the bottom to open the rear covering of the seat; we then proceed to remove the lumbar support of the seat, repairing it or replacing it with a new one if damaged, as shown in the video. At this point, we install the new lumbar support on the seat and then verify its correct functionality.

Posted on 31 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Lumbar Support from the Subaru Outback
How to Remove the Lumbar Support from the Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) If your back cannot tolerate the rigidity of the lumbar support, which causes pain instead of alleviating it, you can remove it from your Subaru Outb…
Repairing the Lumbar Support of the Front Seat in a Subaru Outback
Repairing the Lumbar Support of the Front Seat in a Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) The video shows how to repair the broken lumbar support of a front seat in a Subaru Outback. This operation can be done independently and takes a max…
How to Remove the Rear Seats from the Subaru Outback
How to Remove the Rear Seats from the Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) Below are the instructions that will allow you to remove and replace the rear seats of the Subaru Outback. First, open the rear doors of the vehicle …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos