Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

TPMS Reset on a 2017 Subaru Outback

Model: Subaru Outback BS, MK 5 - Years 2014-2019
Part:

In today's video, we will see how to reset the tyre pressure on a Subaru Outback, fifth generation model produced from 2014 to 2019. First, turn on the ignition of the vehicle without starting the engine, then press and hold the reset button located under the dashboard on the driver's side, near the fuse box, for a few seconds. After this, you will see the tyre pressure light start to flash on your speedometer, so release the reset button when it has flashed 2 to 3 times. Now all that is left is to drive for about 10 to 20 minutes to allow the vehicle to register the new pressure.

Posted on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Subaru Outback
How to reset the TPMS light on the Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) Today we will see the instructions necessary to reset the TPMS light of the Subaru Outback; before performing the reset, it is necessary that all fou…
How to Reset the TPMS Light on the Subaru Outback
How to Reset the TPMS Light on the Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) If the TPMS light on your Subaru Outback (2014-2019) illuminates, indicating low tyre pressure when it is not true, you need to proceed with the manu…
How to reset the TPMS sensors on the Subaru Outback
How to reset the TPMS sensors on the Subaru Outback
Subaru Outback (2020-2025 / MK 6, BT) Today's main information will show us how to reset the TPMS sensors of the Subaru Outback; before performing the tire pressure warning reset, it is n…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos