Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the Subaru Outback

Model: Subaru Outback BS, MK 5 - Years 2014-2019
Part: Tire pressure warning light

If the TPMS light on your Subaru Outback (2014-2019) illuminates, indicating low tyre pressure when it is not true, you need to proceed with the manual reset described below. First, start the instrument panel of your car. Next, go to the passenger side and open the glove compartment. Locate the "Set" button on the side and hold it down for a few seconds. Finally, release the button, and the TPMS light reset procedure can be considered successfully completed. Just turn off the ignition or drive away.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Subaru Outback
How to reset the TPMS light on the Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) Today we will see the instructions necessary to reset the TPMS light of the Subaru Outback; before performing the reset, it is necessary that all fou…
How to reset the TPMS sensors on the Subaru Outback
How to reset the TPMS sensors on the Subaru Outback
Subaru Outback (2020-2025 / MK 6, BT) Today's main information will show us how to reset the TPMS sensors of the Subaru Outback; before performing the tire pressure warning reset, it is n…
Resetting the TPMS on a Subaru Outback
Resetting the TPMS on a Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) Today, we will discover how to reset the tyre pressure warning light on a Subaru Outback; before performing the reset, ensure that all four tyres are…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos