Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Light on the Subaru Outback?

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part:

In this tutorial, we will see how to reset the tyre light on the Subaru Outback, a very simple and quick operation, to be done only after restoring the correct pressure in each tyre following the instructions in the manual. First, go inside the cabin, then insert the key and turn on the ignition. Next, locate the "SET" button located at the bottom of the dashboard, hold it down until the light disappears from the display, and complete the procedure by restarting the vehicle.

Posted on 6 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Subaru Forester?
How to Reset the Tyre Pressure Warning Light on the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) To reset the Service light on the Subaru Forester, first inflate the tyres to the correct pressure value, which is indicated on the sticker inside th…
How to Reset the Tyre Pressure Light on Subaru Cars?
How to Reset the Tyre Pressure Light on Subaru Cars?
Subaru Forester (2012-2019 / MK 4, SJ) Weather conditions also affect the tyre pressure of your car, just like with Subaru vehicles, specifically here we focus on the Subaru Forester. When…
Resetting the Tyre Pressure Light on a Subaru Forester
Resetting the Tyre Pressure Light on a Subaru Forester
Subaru Forester (2008-2011 / SH, MK 3) In today's video, learn how to reset the tyre pressure light on a third-generation Subaru Forester. Before proceeding with the reset operation, ensur…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos