Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fog Light on a Subaru Forester

Model: Subaru Forester MK 3, SH - Years: 2008, 2009, 2010, 2011
Part: Fog lights

See other generations:
This video is currently unavailable

Remove the damaged fog light on a Subaru Forester. Lift the car on a jack and remove the trim around the fog light.

Access from underneath the vehicle (as shown in the video); unscrew the securing screws located on the sides of the fog light with a socket wrench (inner part), disconnect the power connector of the fog light. Once the electrical connection cables are removed, you can detach the fog light from the front bumper.

Replace the damaged fog light with a new one (replace the bulbs if integrated into the new fog light). Install the new fog light back into the bumper.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Install Logo Projector Puddle Lights on a Subaru Forester
How to Install Logo Projector Puddle Lights on a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) In this video, you will see a small Class E detail modification on the Subaru Forester, which generally applies to all Subaru models, ensuring that y…
Where is the fuse box located in the cabin of the 2010 Subaru Forester?
Subaru Forester (2008-2011 / MK 3, SH) To access the fuses in the cabin of your 2010 Subaru Forester, simply follow the following procedure, which takes only a few seconds to complete. Fir…
How to replace the license plate light bulb of a 2019 Subaru Forester
How to replace the license plate light bulb of a 2019 Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Replacing the license plate light bulb on a 2019 Subaru Forester is a really simple and quick operation to do independently. The first step is to ins…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos