Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Mirror on an Impreza

Model: Subaru Impreza MK 2 - Years 2001-2007
Part: Side mirror

How to replace a damaged mirror? Let's look at replacing the mirror from inside the mirror's plastics. Pry between the perimeter of the mirror frame and the mirror glass. Keep prying until the plastics detach from the mirror (disconnect the power cable). If the mirror is broken, remove all the pieces. Clean the entire surface of the plastic base if you need to glue the new mirror. Replace the damaged piece with the new one. Ensure the plastic clips snap into the mirror supports. Secure the mirror if it uses adhesive.

Updated on 22 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Interior Rear View Mirror on a Subaru Impreza
How to Remove the Interior Rear View Mirror on a Subaru Impreza
Subaru Impreza (2016-2023 / MK 5) To remove the interior rear view mirror on a Subaru Impreza, start by disconnecting any electrical connectors present at the base of the mirror. Pres…
Replacing Brake Discs and Pads
Replacing Brake Discs and Pads
Subaru Impreza (2001-2007 / MK 2) Has the brake wear warning light just come on? Don’t wait any longer, replace them! Let’s see how to do it together. Once the car is lifted on the si…
How to Replace the Key Battery on a Subaru Impreza
How to Replace the Key Battery on a Subaru Impreza
Subaru Impreza (2007-2011 / MK 3) If you intend to replace the battery in the remote key of your vehicle model, the description below provides all the instructions and operational met…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos