Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Automatic Window of the Subaru

Model: Subaru Subaru Various
Part: Warning light – error code

If you have performed maintenance and/or replaced the fuse for the front windows, you may need to reset the OneTouch function for automatic opening and closing. To do this, open the door and manually lower the window halfway using the appropriate button. Immediately afterwards, press the same button upwards to fully close the window. Keep it pressed for a few seconds. Finally, release it and the automatic opening and closing function of the windows should now work correctly.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock in the Subaru
How to set the clock in the Subaru
Subaru Subaru Various The onboard computer clock of Subaru cars can be updated automatically or you can choose to manually set the time update. To set the automatic clock …
How to Reset the Tyre Light on Subaru Vehicles
Subaru Subaru Various This is undoubtedly the easiest and most practical method, as explained in the video above, to reset the tyre light on Subaru vehicles. There is no n…
How to Reset the Maintenance Light of the Subaru Accend
How to Reset the Maintenance Light of the Subaru Accend
Subaru Subaru Various Manually resetting the maintenance light of your 2019 Subaru Accend is a task you can easily perform yourself, provided you carefully follow the inst…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos